If you are a tech-savvy, you must have heard the term 192.168.0.1 IP Address once in your usage of the internet. Most of the people have heard about it, but they don’t know what it really is. And that’s why we are here to help you with it. Every single device that is connected to the internet is assigned an IP Address, in which IP stands for Internet Protocol.
Internet Protocol Address helps to identify the network interface, and it also helps to find out the location of the device. Most of the routers which you use at your home have an IP address labelled as 192.169.0.1, let’s proceed with the article.
What is 192.168.0.1 Router IP Address
The Internet Assigned Numbers Authority (IANA) is the registry which manages the IP Addresses, and they have stated that 192.168.0.1 is a private IP Address. This IP Address is most commonly used by Routers made by Netgear & D-Link. Other default alternative IP Addresses for these routers can be 192.168.2.1 or 192.168.1.1
These IP Addresses can help the end-user or administrator perform certain actions like changing the Internet Security Settings, connect or disconnect from the Internet, and Admin related network functions.
Features of 192.168.0.1 IP Address
- One of the main features of this IP Address is that it is non-routable, which means it cannot go public. Specific ranges of the IP address have to go through NAT Gateway or Proxy, and then can be publish to the internet. They cannot be publish directly.
- This type of Private IP Address is mostly use in small spaces or for home uses as your ISP will only allow a limited number of public addresses to each subscriber.
- With this IP Address, no separate DHCP servers are need, and also the information flow becomes easier and smoothest.
How To Login to 192.168.0.1 IP Address Administration
Step 1 – Type 192.168.0.1 in the address bar of the browser you are using and hit Enter.
Step 2 – The login page will then come up.
Step 3 – Put in your Username and Password in the input fields. If it doesn’t work, try putting in Admin in both the fields as it is the default username & password for most of the routers out there.
Step 4 – Now click on Login. Once logged in, you can change your password to one of your choices.
Now you can change the basic and advanced network settings of the router according to your preference.
How to Find Your Router’s IP Address on Any Computer
All of the manufacturers put in the IP Address in the documents that came with the router. You can check those documents to find it. Even if the model of the router is different, but it is made by the same manufacturer, then the IP Address of those models will be the same.
There are some methods to check the IP Address. We have listed some of them below:
Method 1 – Using Command Prompt (cmd.exe)
Step 1 – Click on the Start button in windows.
Step 2 – Type cmd in the search bar and open it.
Step 3 – Now in the command prompt, type ipconfig and hit Enter.
Step 4 – All the details like IP Address, DNS Server, Gateway will be present here.
Method 2 – Read The Router’s User Guide
Step 1 – If you have router made by Netgear, the gateway IP Address will be found in Maintenance Page under the section Router Setup.
Note – Netgear Routers mostly have 192.168.0.1 as their default IP Address.
Step 2 – If you have a router made by Linksys, then the IP Address will be found in Setup, under Basic Setup Window.
Note – Linksys Routers mostly have 192.168.1.1 as their default IP Address.
If entering 192.168.0.1 in the address bar of your browser doesn’t work, then you can find the correct gateway by following Method 1 mentioned above as it shows you all the information regarding your Network.
How To Change Your Router’s IP Address?
Sometimes an IP Address conflict pops up because some other device on your network also has the same IP Address as yours. In that case, you might want to change your IP Address. Follow the steps below (For Windows) –
Step 1 – Right-click on the Network icon.
Step 2 – Click on Open Network And Sharing Center.
Step 3 – In the Network and Sharing centre, click on the Connections.
Step 4 – A new window will come up showing you your Network Connection Status. You have to click on Properties.
Step 5 – Now another window will pop-up. Now find Internet Protocol Version 4 (TCP/ IPv4) and click on it.
Step 6 – Now fill in the desired IP Address and then click on OK.
Step 7 – Reconnect to your router and you are done!
Conclusion
192.168.0.1 is the standard IP Address found on all the routers. And this article has everything that you need to know about 192.168.0.1 IP Address. If you still need any help, do let us know.