Today our lives are totally dependent on the internet. From communication to entertainment to research every field of work has been greatly enhanced with the ever-increasing use of the internet. A successful internet connection requires two basic conditions to be taken care of that are a good quality configured router and an IP Address. Let us first learn a bit about both of these terms-routers and IP addresses.
A router is a directing device used in the setting up of a network. It is the most important device must for a network, without this a network can never be set up functionally. It shows the path to the packets of data from their source of origin till they reach the final destination node. It is the main reason behind the successful transfer of data from one system to another within a network.
An IP Address on the other hand is a unique or distinct label assigned to each of the routers being used in a network. It is a 32-bit number divided into octets. It is an integral part of a router network because it enables the devices on it to connect to various other devices. It is very important for logging in to the 192.168.1.100 router admin panel along with other router’s admin panels as well.
One such IP Address used today is 192.168.1.100 router IP. It is commonly used as a default IP address for private networks. It cannot be geographically tracked as it cannot be connected with from outside an internal private network.
By using this IP address one can easily modify or change the administration settings of an admin panel. This gives a user complete control over the private network. It provides an easy way to assign different IP addresses to devices such as printers, smartphones, FAX machines, computers, laptops, etc. on our network as all these devices obtain successive IP addresses. It is quite convenient to use this IP address while setting up a new network.
192.168.1.100 is the beginning of the default dynamic IP Addresses range for Linksys home routers. It is a private network that can be assigned to any device within a local area network. It is a very common address used by various companies to configure their routers. Especially to be kept in mind is the thing this address is often confused with 192.168.100.1 since the digits of both are the same just there is a slight difference of arrangement of digits. Both the addresses are completely different in themselves.
Now since we have completely become familiar with the 192.168.1.100 router IP, let us now learn the procedure to access its admin panel. Before starting the procedure, sometimes there might arise some issues while using this address in setting up a network which must be taken care of for sure. They are as follows:
- Always use a stable source of supply of power for the purposes of the configuration of routers to avoid any hassles.
- Always use good quality cables if your connection is wire-based and not a wireless connection.
- If any other issue comes forth, check the router lights which will give you a clear indication.
How to Login to 10.0.0.1 IP Address?
The access to the 192.168.1.100 router admin panel can be conquered easily with the following simple steps:
STEP 1 – Initially open up a web browser on your system. It is recommended highly to use the latest version of the browser whichever you are using in order to avoid unnecessary hassles.
STEP 2 – Then, click on the access router panel button to open the 192.168.1.100 IP admin panel.
STEP 3 – By now you will be able to see the user authentication page. Enter your default username and password here in the required spaces and tap enter to proceed further.
STEP 4 – Here the admin page of 192.168.1.100 IP will open up.
STEP 5 – From here you can easily make necessary alterations in the settings of the router as per your needs. You can even add or remove devices, change your network type, or even the name of your network.
STEP 6 – You can also change the speed of transmission, etc along with keeping a check on the various devices connected to your router from the admin panel of your 192.168.1.100 router IP.
How to Find IP Address of Router?
Pre awareness of the IP Address of one’s router is a must log in to the admin panel of any router. In case you are not aware of the IP Address of your router, just simply follow the steps below to find out the IP Address of your router:
STEP 1 – At first, press the start button and type CMD or command prompt in the search box.
STEP 2 – Select the command prompt out of the list of results found.
STEP 3 – A new window in the blank background will pop up.
STEP4 – Type ‘ipconfig and tap the enter button afterward.
STEP 5 – Here you will be able to see the IP Address of your router mentioned just next to the default gateway.
How to Change IP Address of Your Router?
Sometimes the situation may arise that you forgot the IP Address of your router or you might want to change it sometimes due to circumstances or for security reasons, it can be done by the following procedure:
STEP 1 – Initially, open the web browser and enter the IP Address of your router into the address bar.
STEP 2 – Next enter your username and password (default username is ‘admin’ and password is blank). Click on ‘log in’.
STEP 3 – Afterwards click on setup > network settings.
STEP 4 – Then click on router settings, type in your router’s new IP Address and subnet mask.
STEP 5 – Click on save settings.
STEP 6 – You have successfully changed your router’s IP Address.
Therefore this article has completely defined all that a user of 192.168.1.100 must know about. From what generally a router and an IP Address stands for to the processes of logging in the admin panel, finding the IP Address of a router, or even changing it, the context above is enough to clarify the concepts above.
